1.1One graft per rootstock
A bench graft joins one dormant scion to each individually potted rootstock. A bank of these plants supplies one grafted cutting per rootstock after the unions heal.
Generated automatically. Not reviewed by a person. Not legal advice or an opinion.
Questions about how individual parts of claim 1 might be changed. A question may describe something different from what the claim language recites, or a version of it; no view is offered on which.
A bench graft joins one dormant scion to each individually potted rootstock. A bank of these plants supplies one grafted cutting per rootstock after the unions heal.
Sample unions are sectioned lengthwise during the sixth through eighth weeks to check for continuous callus and vascular connections across the graft. When the sample unions meet both criteria, the remaining cuttings are taken below the union so each retains a rootstock segment for rooting.
Stock plants with no visible disease symptoms grow on raised benches and receive water through drip lines that limit splash onto shoots. An operator uses sanitized shears and clean trays to transfer the cuttings directly into fresh rooting medium.
A small brush applies a thin layer of talc containing indole-3-butyric acid to the basal wound and the adjacent rootstock bark. The cutting enters a preformed hole in moist perlite so the medium leaves the powder in place.
A thermostatically controlled chamber holds leafy grafted cuttings at 22–25 °C under diffuse light. Intermittent mist limits water loss from the leaves while the rootstock bases form roots in moist, aerated perlite.
Further arrangements of the same subject matter, described here as of the publication date at the foot of this page.
In a riparian restoration nursery, attach buds from locally sourced willow donor plants at 10 to 20 cm intervals along compatible willow stock shoots. Leave the buds on the stock plants for 4 to 5 months, then divide the shoots into sections with one graft per cutting and disinfect the cuttings. Dip the basal ends in rooting hormone and place them in a rooting medium at 60 to 100% relative humidity and 7 to 15 °C until roots form. Transfer the rooted cuttings to shaded outdoor nursery beds and grow them until shoots emerge from the grafted buds.
After 4 to 5 months on the stock plant, harvest sections with one graft per cutting and disinfect them. Fill perforated propagation cells with washed coarse horticultural perlite as the sole rooting medium. Dip the basal ends in rooting hormone and insert them into premoistened perlite with the graft unions above the surface. Maintain 60 to 100% relative humidity and 7 to 15 °C until roots form, then transfer the cuttings to a greenhouse for shoot growth.
Place simple splice grafts at 10 to 20 cm intervals on separate lateral shoots along an attached rootstock stem. Match each lateral shoot to a scion of the same diameter, make complementary sloping cuts, and secure the joined surfaces with grafting tape. After 4 to 5 months, divide the main stem into sections that each carry one grafted lateral, disinfect the sections, and dip their basal ends in rooting hormone. Insert the main stem bases into rooting medium at 60 to 100% relative humidity and 7 to 15 °C, then transfer rooted sections to a greenhouse for shoot growth.
On each stock shoot with at least 1.2 m of usable length, place four grafts at 30 cm intervals and leave the shoot attached for 4 to 5 months. Cut halfway between neighboring grafts so each interior section is 30 cm long with a graft near its midpoint. Disinfect the sections, dip their basal ends in rooting hormone, and place them in deep propagation cells with 5 cm of each cutting below the medium surface. Root the cuttings at 60 to 100% relative humidity and 7 to 15 °C, then move them to a greenhouse for shoot growth.
After 4 to 5 months of graft development on the stock plant, harvest the grafted cuttings, disinfect them, and dip their basal ends in rooting hormone. Set perforated propagation trays filled with a coir and perlite mix directly on a capillary mat inside an enclosed rooting chamber. Feed the mat through wicks from a reservoir below bench level so water enters the cells through their drainage holes, and maintain the chamber at 60 to 100% relative humidity and 7 to 15 °C. Transfer the rooted cuttings to a greenhouse bench for shoot growth.
After the grafts develop on the stock plant for 4 to 5 months, harvest and disinfect the cuttings, dip their basal ends in rooting hormone, and insert them into clear propagation cells held in opaque sleeves. A motorized stage lifts each tray clear of the sleeves once a day so a fixed camera can image the cell walls under diffuse lighting. Image analysis flags cells when a visible root extends at least 10 mm along the wall in two consecutive inspections. The software lists the flagged cell positions for transfer to greenhouse trays, where the cuttings remain until shoots emerge.
A spacing gauge marks graft sites 15 cm apart along a sound rootstock shoot. Each site receives a matching scion bud chip, and elastic grafting tape holds the cut faces together.
Grafted shoots remain attached to irrigated stock trees for four and a half months. The stock roots supply water during union formation, and each shoot is cut below its union at the end of the holding period.
Grafted cuttings of a crop that tolerates chlorine enter a freshly prepared sodium hypochlorite bath containing 0.5% available chlorine for one minute. Two rinses with clean water remove residual solution before the basal hormone treatment.
For a crop that roots under cool conditions, the basal 2 cm of each disinfected cutting enters a 1,000 mg/L indole-3-butyric acid solution for five seconds. The cuttings stand in moist perlite and coir at 90% relative humidity and 14 °C until roots form.
Passages reproduced word for word from two earlier-published U.S. patent documents, placed beside the language of claim 1. No characterization is offered. Each passage is marked A or B for the document it comes from; ¶ numbers are the paragraph numbers in the USPTO’s published full text of that document.
Each tree 2 comprises a rootstock 6 of a known type on a grafting point 7 of which (indicated schematically by a line) an offshoot 8 or other propagation material of the variety to be propagated has been grafted, or will subsequently be grafted, in a known manner, for example an offshoot of an apple variety, provided with at least a first bud or side branch 9.A · US 2021/0127590 A1 · ¶ 43
In a preferred embodiment of the invention, the nonstructural grafts impart part or all of their disease or pathogen immunity, resistance, or tolerance, to the Mature Complex Architecture Plant 131 between the time when the grafted is performed and the time when the graft is ultimately rejected by the Mature Complex Architecture Plant 131, which effect can be enhanced or modulated by: (a) the combinations of nonstructural graft donor plants that are selected;B · US 11,800,834 B2 · ¶ 35
After bending, the tree 2 is grown in the nursery, pot or greenhouse ground 5 supporting the offshoot 8 or other propagation material of the variety to be propagated in a vertical position by means of a support pole 4, so that the tree 2 develops above the grafting point 7 and from the offshoots (or twigs) 9,10 a plurality of vine-like branches or side branches 19 arranged on the side of the first pre-set angle α formed between the rootstock 6 and the ground 5.A · US 2021/0127590 A1 · ¶ 59
After the assembled in vitro Complex Architecture Plant 130 is secured inside of Micrografting Clip (Closed) 51, the in vitro Complex Architecture Plant 130 is planted by its roots in a development medium (not shown) which can consist of a cube of rock wool moistened with a nutritive solution, or a pot containing substrate moistened with a nutritive solution, or an in vitro rooting medium.B · US 11,800,834 B2 · ¶ 154
After bending, the tree 2 is grown in the nursery, pot or greenhouse ground 5 supporting the offshoot 8 or other propagation material of the variety to be propagated in a vertical position by means of a support pole 4, so that the tree 2 develops above the grafting point 7 and from the offshoots (or twigs) 9,10 a plurality of vine-like branches or side branches 19 arranged on the side of the first pre-set angle α formed between the rootstock 6 and the ground 5.A · US 2021/0127590 A1 · ¶ 59
An empty cell means only that no passage was reproduced there.
Once the trees produced with the method of the invention have been put into production, they ensure a greater uniformity of the vigour of the vertical axes and maintain the characteristic of the apical dominance.A · US 2021/0127590 A1 · ¶ 3
The tree crown of a tree is composed of parts often in competition with one another (Bailey 1916;A · US 2021/0127590 A1 · ¶ 4
To date, there is no effective tool to stop the spread of the Candidatus Liberbacter pathogen or to manage the HLB disease.B · US 11,800,834 B2 · ¶ 7
HLB or Citrus Greening reduces the quantity and quality of citrus fruits, eventually rendering infected trees useless.B · US 11,800,834 B2 · ¶ 9
patent.fyi, US 2026/0354312 A1, claim 1, first published 2026-11-18T21:18:11-05:00, https://patent.fyi/US20260354312/, SHA-256 4199340e2823c605a53f84912d4eef5978b8b9519d60c3115abb5658634d2832