1.1Wired catheter signal link
A piezoresistive bridge at the catheter tip produces a differential voltage proportional to absolute pressure. Insulated conductors carry bridge excitation and the return signal between the tip and the external reader.
Generated automatically. Not reviewed by a person. Not legal advice or an opinion.
Questions about how individual parts of claim 1 might be changed. A question may describe something different from what the claim language recites, or a version of it; no view is offered on which.
A piezoresistive bridge at the catheter tip produces a differential voltage proportional to absolute pressure. Insulated conductors carry bridge excitation and the return signal between the tip and the external reader.
A catheter-tip differential transducer exposes one side of its diaphragm to the intra-body pressure. A dry lumen vents the reference side to room air, so the calibrated output represents pressure relative to room air.
The battery directly supplies the pressure sensor, sampling circuit, and transmitter. A free-running oscillator clocks acquisition and transmission at a fixed rate throughout the measurement session.
A light-emitting diode at the catheter hub encodes digitized absolute pressure samples as light pulses and launches them into the fiber. A photodiode in the external processor converts the pulses into electrical signals for decoding.
A wearable barometer transmits time-stamped ambient absolute pressure readings to the implant. The implanted microcontroller subtracts the latest ambient reading from the intra-body absolute pressure reading and transmits the relative pressure value to the display.
Further arrangements of the same subject matter, described here as of the publication date at the foot of this page.
A weighted bolus contains an absolute pressure sensor, a battery, a magnetic activation switch, and a short-range radio. A flexible diaphragm separates the sensor from rumen contents and transmits local pressure through a sealed oil-filled cavity. A handheld receiver measures ambient absolute pressure through a vented port and subtracts it from each absolute pressure reading transmitted by the bolus.
A capacitive diaphragm transducer provides the internal absolute pressure measurement. Pressure at the sensing port deflects a conductive silicon diaphragm over a sealed vacuum cavity, changing its capacitance relative to a fixed electrode. A capacitance-to-digital circuit converts the reading to pressure using stored calibration coefficients, and a radio sends the value to the external receiver for ambient pressure subtraction.
A catheter carries two absolute pressure sensors spaced 30 mm apart, each with a calibrated range of 50 to 160 kPa. Leads connect both sensors to a battery-powered radio module at the catheter hub, where a push button starts acquisition. The module samples both channels at 50 Hz and sends each pair with a shared timestamp. The receiver subtracts one contemporaneous ambient pressure reading from both channels and records the two relative pressure values separately.
A bladder pressure catheter connects to a wireless transmitter at its hub, and the external receiver measures ambient absolute pressure through a vented port. A urodynamics workstation accepts timestamped relative bladder pressure from the receiver and mass readings from a weighing uroflowmeter beneath the collection vessel. The workstation uses a shared time base and converts the change in collected mass per unit time to volumetric flow using a configured fluid density. It records the pressure and flow waveforms on the same time axis.
The internal sensor timestamps each absolute pressure sample at acquisition and sends samples in wireless batches. The receiver periodically exchanges timestamped messages with the sensing unit and fits a linear mapping between the two clocks. For each internal sample, the receiver converts its timestamp to receiver time, interpolates between the two ambient pressure samples that bracket that time, and subtracts the interpolated value. Samples without bracketing ambient readings are recorded with a missing reference flag.
The sensing unit samples internal absolute pressure at 100 Hz and keeps the most recent two seconds in a circular buffer while transmitting a routine reading at 5 Hz. Firmware triggers a capture when the pressure changes by at least 1 kPa over 100 ms and stores the buffered samples plus the next three seconds of data. The radio sends the capture in numbered packets with acquisition timestamps. The receiver reconstructs the waveform and subtracts the corresponding values from its timestamped ambient pressure log.
An operator reads the local absolute pressure from a separate room barometer and enters the reading in kilopascals. The processor subtracts the stored value from incoming absolute pressure samples until the operator updates the entry.
A silicon diaphragm deflects over a sealed low-pressure cavity. Four piezoresistors in a bridge convert the deflection into a voltage, and a calibration table converts the digitized voltage and die temperature into absolute pressure.
A tuned coil and rectifier produce a wake signal when an external reader generates an alternating magnetic field. The wake signal enables a load switch that supplies battery power to the pressure sensor and transmitter.
A vent in the external enclosure admits room air to a capacitive diaphragm with a sealed vacuum reference. A hydrophobic membrane covers the vent, and the readout circuit converts diaphragm capacitance into ambient absolute pressure.
A microcontroller pairs each received intra-body pressure sample with the ambient sample closest to it in time. It converts both readings to pascals and subtracts ambient absolute pressure from intra-body absolute pressure.
Passages reproduced word for word from two earlier-published U.S. patent documents, placed beside the language of claim 1. No characterization is offered. Each passage is marked A or B for the document it comes from; ¶ numbers are the paragraph numbers in the USPTO’s published full text of that document.
In the absolute pressure transducer function 90, the absolute pressure sensor 20, such as a standard pirani sensor, which can sense absolute pressure accurately from about 100 torr down to about 10−4 torr, senses pressure in the load lock chamber 60. A pirani bridge circuit 92 produces a voltage signal that is indicative of the absolute pressure sensed by the pirani sensor 20.A · US 7,076,920 B2 · ¶ 33
Physical sensors can provide medical monitoring for such bodily functions as heartbeat, blood pressure, oxygenation, respirator rate.B · US 2008/0298389 A1 · ¶ 65
The combination differential and absolute pressure transducer has a differential pressure sensor that is capable of sensing a pressure difference between ambient atmospheric pressure in the room and pressure in the load lock chamber, and it has an absolute pressure sensor that is capable of sensing absolute pressure in the load lock chamber.A · US 7,076,920 B2 · ¶ 17
The data communication interface may be further used for instant monitoring of the data supplied by the physiological sensors. In this case, when real-time monitoring through the external processing device should be performed, it may be adequate to pass control over the communications over the intra-body communication network to the external processing device enabling the external processing device for instance to prioritized sensor data of one or more physiological sensors.B · US 2008/0298389 A1 · ¶ 153
An empty cell means only that no passage was reproduced there.
Load locks are used, therefore, to facilitate insertion of substrates into the process chambers for deposition and/or etch processing and to remove the wafers from the process chamber while maintaining the vacuum in the process chamber.A · US 7,076,920 B2 · ¶ 5
In the past, it has been difficult to control the load lock in an efficient manner.A · US 7,076,920 B2 · ¶ 10
Personal area networking is also applied for interlinking physiological sensor in personal preferably wearable systems including ECG sensors, eye movement sensors, gyroscopes, accelerometers, pulse oximeters, skin temperature and conductivity sensors and further physiological sensors.B · US 2008/0298389 A1 · ¶ 2
Since a radio frequency based communication technologies irradiates into the space via antennas, any radio frequency communication is basically detectable by any third parties.B · US 2008/0298389 A1 · ¶ 7
patent.fyi, US 2026/0354702 A1, claim 1, first published 2026-11-19T02:47:19-05:00, https://patent.fyi/US20260354702/, SHA-256 824c6990f9c3b50e719d3e9e2ebb183e10484991e52124c830516320313363c7