Questions about how individual parts of claim 1 might be changed. A question may describe something different from what the claim language recites, or a version of it; no view is offered on which.
1.1Measure acuity across defocus
What ifWhat if the evaluation measured visual acuity across a series of defocus settings?
Claim language“identify higher order aberrations”
A trial frame presents spherical lens powers in 0.5 diopter steps over the distance correction. The examiner records the smallest line read at each step and uses the resulting acuity curve to characterize the usable focus range.
1.1Measure pupil diameter under illumination
What ifWhat if the evaluation measured pupil diameter under bright and dim illumination?
Claim language“identify higher order aberrations”
An infrared pupillometer records pupil diameter at two controlled illumination levels. The measured diameters guide selection of a central aperture and surrounding opaque zone for a small-aperture optic.
1.2Use a diffractive lens
What ifWhat if the supplied implant used a diffractive optic to provide distance and near focus?
Concentric phase steps on a foldable acrylic optic divide transmitted light between two diffraction orders. The base curvature sets the distance focus, and the step spacing sets the near addition.
1.3Use progressive spectacle correction
What ifWhat if a pseudophakic eye received extended working-distance correction from a progressive spectacle lens?
Claim language“implanting the non-diffractive intraocular lens implant in the eye”
The upper zone provides distance correction, and a progressive corridor increases plus power toward the lower reading zone. The wearer selects intermediate and near powers by directing the line of sight through the corresponding parts of the lens.
Section 2 · machine-generated
Variations
Further arrangements of the same subject matter, described here as of the publication date at the foot of this page.
Other field of use
Coma controlled optics for machine vision
A machine vision camera uses a fixed sensor and a removable non-diffractive phase plate near the objective aperture stop. A wavefront sensor measures higher order aberrations across the objective pupil before the plate is installed. A continuous surface on the plate adds a prescribed coma vector to the measured wavefront. The camera records a target at several object distances, and measured image contrast establishes the usable depth of field.
Component substitution
Phase diversity in place of lenslets
A phase diversity aberrometer replaces the lenslet array and spot detector of a lenslet based aberrometer with an imaging detector and a calibrated defocus element. The detector records an in-focus retinal beacon image and a second image with known defocus. A joint fit to the two images estimates the higher order wavefront coefficients over the recorded pupil. The measured coma vector enters the selection and orientation of a continuous-surface intraocular lens.
Coma from an internal index gradient
A continuous refractive-index gradient replaces the coma-producing surface departure within an intraocular lens. The lens retains smooth base surfaces that provide its nominal focusing power. A scanned laser writes a calibrated index change through an internal layer, with transverse exposure varying across the optic to produce the prescribed coma phase profile. Interferometry measures the finished wavefront and locates the coma direction relative to a peripheral orientation mark.
Parameter or scale variation
Three pupil diameters for through-focus testing
A model eye places a continuous-surface intraocular lens behind a corneal element and an interchangeable aperture. The test uses 3, 4, and 5 mm aperture diameters and measures image contrast from −1.0 to +3.0 diopters of target vergence in 0.25 diopter increments. Wavefront measurements record horizontal and vertical coma at each aperture, with the target coma spread specified at the 5 mm aperture. The resulting contrast curves show how pupil diameter affects the useful focus range.
Combination with existing systems
Coma alignment with surgical image registration
A preoperative aberrometer records the ocular coma vector together with an image of iris landmarks. A surgical microscope camera registers the live iris image to the preoperative image and updates an overlay showing the planned orientation of the implant. A peripheral orientation mark identifies the direction of the lens coma vector. The implant rotates until its mark aligns with the overlay.
Automated or data-driven variant
Software selection using measured lens maps
A program receives a patient wavefront map and a library of measured wavefront maps for continuous-surface intraocular lenses. A ray-traced eye model places each candidate lens at the measured implant-plane estimate and evaluates a set of candidate rotations. The program extracts the resultant coma spread at a specified pupil diameter and calculates through-focus image contrast. It filters candidates by the prescribed coma spread and ranks the remaining lens and rotation pairs by average contrast across the selected vergence range.
Specific version of a part
Extend focus through a pinhole
An opaque annulus within the optic leaves a clear aperture approximately 1.4 mm in diameter. The aperture blocks peripheral rays and limits the growth of the retinal blur spot with defocus.
Extend focus with spherical aberration
An aspheric optic gives central and peripheral ray bundles different axial focal positions. With the optic centered, the radial power profile distributes image contrast over a range of axial focus positions.
Sample the ocular wavefront
A lenslet array samples light returning from a retinal spot and forms a grid of spots on a camera. Software converts spot displacements into local wavefront slopes and fits the higher-order terms over a defined pupil diameter.
Map the corneal wavefront
A rotating slit camera captures cross sections of the anterior and posterior corneal surfaces. Software reconstructs both surfaces, traces rays through them, and reports corneal coma and spherical aberration over a 5 mm analysis diameter.
Use a smooth acrylic optic
A foldable acrylic implant has a smooth aspheric anterior surface and a smooth posterior surface. Surface curvature sets the refractive power, and two flexible haptics support the optic in the capsular bag.
Orient a coma producing optic
A foldable non-diffractive implant has a smooth asymmetric refractive surface and alignment marks that indicate its coma axis. The implant is placed in the capsular bag and rotated so its coma component adds to the measured ocular component. Postoperative wavefront measurements quantify the resultant coma at the pupil diameter used for planning and checked against the 0.3 μm target.
Section 3 · quoted from USPTO records
Other work
Passages reproduced word for word from two earlier-published U.S. patent documents, placed beside the language of claim 1. No characterization is offered. Each passage is marked A or B for the document it comes from; ¶ numbers are the paragraph numbers in the USPTO’s published full text of that document.
1.1evaluating a patient to identify higher order aberrations associated with an eye of the patient;
From the captured images of the HS focal plane we can compute the ocular wavefront aberrations of the patient's eye.
A · US 2009/0135372 A1 · ¶ 46
1.2providing a non-diffractive intraocular lens implant; and
The surface shape of an anterior surface of an effective optical area of the aspherical intraocular lens is aspherical, or the surface shape of a posterior surface of an effective optical area of the aspherical intraocular lens is aspherical, or the surface shapes of an anterior surface and a posterior surface of an effective optical area of the aspherical intraocular lens are aspherical.
B · US 2016/0067034 A1 · abstract
1.3implanting the non-diffractive intraocular lens implant in the eye of the patient to provide a resultant coma spread associated with the eye of greater than about 0.3 μm.
The intraocular lens maintains at a relative position in a capsule bag in the human eye by means of the interaction force between the support hapics and the capsule bag after being implanted into the human eye.
B · US 2016/0067034 A1 · ¶ 3
An empty cell means only that no passage was reproduced there.
Statements in these documents
This invention relates generally to apparatus for use in determining the front shape and power of the cornea of a human eye and thus facilitating the diagnosis and evaluation of corneal anomalies, design and fitting of contact lens, and the performance of surgical procedures.
A · US 2009/0135372 A1 · ¶ 2
Unfortunately, the capability to effectively and efficiently design custom WGSL corrections in the clinical environment is severely limited by current instrumentation.
A · US 2009/0135372 A1 · ¶ 6
An intraocular lens (IOL) is an artificial lens which is used for implantation into a human eye to replace a natural lens in the human eye which becomes opacified due to the cataract disease, or which is used in a refractive operation to correct vision of the human eye.
B · US 2016/0067034 A1 · ¶ 2
The conventional spherical IOL has a positive spherical aberration, increasing the total spherical aberration of the human eye on the basis of the positive spherical aberration of the cornea and thus lowering the visual quality after the surgery.
B · US 2016/0067034 A1 · ¶ 5
Cite aspatent.fyi, US 2026/0354966 A1, claim 1, first published 2026-11-19T06:07:06-05:00, https://patent.fyi/US20260354966/, SHA-256 b59cf10aa4da3b94d3cd6c7dc9dffd8485a6559893c04c1698d7bdc7c6cf5ceb