1.1Solid damped base plate
A viscoelastic sheet is bonded between the underside of the base plate and a thin steel facing. Disc impacts flex the base plate and shear the sheet, which dissipates part of the vibration energy as heat.
Generated automatically. Not reviewed by a person. Not legal advice or an opinion.
Questions about how individual parts of claim 1 might be changed. A question may describe something different from what the claim language recites, or a version of it; no view is offered on which.
A viscoelastic sheet is bonded between the underside of the base plate and a thin steel facing. Disc impacts flex the base plate and shear the sheet, which dissipates part of the vibration energy as heat.
A folded steel channel bolts to the top and base plates and holds them at a fixed spacing. A captured roller travels in a slot near the bottom of the channel and carries an eye for the chain ends.
A split collar clamps to the rod and carries a horizontal pivot pin. The arm swings upward when an impact pulls on the chains, and a torsion spring returns the arm to its lower stop.
Two vertical back plates bolt side by side to structural backing in a flat wall. The top and base plates span the two back plates, which transfer the target weight and disc impact loads into the wall.
Slotted clamps secure the upper ends of 25 mm polyester straps to the top plate, and sewn loops connect the lower ends to the attachment ring. The straps deflect on impact and pull the ring upward as the disc loses forward speed and drops into the cage.
Further arrangements of the same subject matter, described here as of the publication date at the foot of this page.
Fasten the two back plates to perpendicular test-cell walls opposite the discharge of a belt conveyor that carries flat circular samples. Couple the perforated top and base plates to both back plates, place the vertical rod between the plates, and hang the chains from the top plate to the sliding ring. Fit the curved guard rail between the back plates and connect it to the base plate with cage bars. The conveyor sends samples into the chains, and the cage retains them for inspection after each trial.
Suspend vertical strips of woven polyester webbing between the top plate and the sliding ring on the support rod. Clamp the upper ends beneath the top plate around the disc entry area and sew closed loops at the lower ends to capture the ring. Set each strip length with enough slack for the ring to rise as the strips deflect. The strips yield on impact and direct the disc into the lower cage.
Roll a sheet of welded stainless-steel wire mesh to match the curvature of the guard rail. Capture the upper and lower mesh edges in channels fastened to the guard rail and base plate, and clamp the vertical ends against the two back plates. For discs at least 18 mm thick, use mesh with 10 mm clear square openings and enclose all cut wire ends inside the channels. The mesh retains discs after they fall from the chains and leaves open area for airflow.
Size the target for discs 250 to 300 mm in diameter, with a clear entry width of 600 mm and a vertical gap of 450 mm between the guard rail and the underside of the top plate. Space the base and top plates 600 mm apart and distribute 18 chains across the forward half of the top plate, with their lower ends gathered at the sliding ring. Limit clear gaps between adjacent cage bars to 20 mm and extend the guard rail from one back plate to the other. The wide entry admits angled throws, and the cage catches discs that drop after striking the chains.
Mount the target above a gravity return chute that runs along one wall toward the throwing area. Set a sloped insert inside the lower cage on standoffs above the perforated base plate, and align its low edge with a discharge slot beneath the guard rail. Make the slot and chute at least 25 mm wider than the largest disc, and fit side flanges to keep discs in the chute. The chains slow each disc, and the insert feeds it flat through the slot into the return chute.
Mount two through-beam optical sensors on brackets near the bottom of the cage, with both beams spanning the cage below the guard rail and crossing above the base plate. Set the beam height within the thickness of a disc lying flat on the base, and position the crossing point in the usual landing area. A controller records one catch when both beams remain blocked for 300 milliseconds. The controller waits for both beams to remain clear for 500 milliseconds before recording another catch.
Staggered rows of 10 mm holes perforate the steel top plate on 18 mm centers. The holes let airborne sound pass through the plate, and a solid center region supports the rod connection.
A stainless steel attachment ring carries a flanged acetal sleeve that slides on the bottom portion of the support rod. Two stop collars spaced 45 mm apart limit the ring's movement along the rod.
A 3 mm steel back plate has bent upper and lower flanges that bolt to the top and base plates. Two vertically spaced mounting holes in the plate receive screws that fasten it to timber backing in the first wall.
A 19 mm steel tube follows a circular arc and has flattened ends that bolt to the two back plates. Welded steel bars span from the base plate to the underside of the tube to contain the disc.
Passages reproduced word for word from two earlier-published U.S. patent documents, placed beside the language of claim 1. No characterization is offered. Each passage is marked A or B for the document it comes from; ¶ numbers are the paragraph numbers in the USPTO’s published full text of that document.
As depicted in the non-limiting embodiment of FIG. 2, when a basket 10 is mounted within a pool skimmer housing, a fluid path 31 that extends between the one or more pump suction ports 16 and the air slots 33 of the upper basket rim 25 is formed. Air slots 33 are deposed in the upper basket rim 25 in some embodiments to allow atmospheric or fluid communication with fluid path 31, even when pool level is at the upper wall 17 of the pool throat opening 3.A · US 9,945,141 B2 · ¶ 51
No. 5,830,350 to Price describes a skimmer basket that has a central perforated pylon extending from the basket bottom to above the basket rim.A · US 9,945,141 B2 · ¶ 8
A disc golf basket is typically constructed using a central pole holding a disc-catching basket with an assembly of hanging chains.B · US 2022/0023731 A1 · ¶ 3
The chains 108 hanging or stretching downward from the catchers 114 are received by the tray member flexible ring 112 along its length.B · US 2022/0023731 A1 · ¶ 32
An empty cell means only that no passage was reproduced there.
In the case of connecting pump suction to a skimmer only, the basket will usually fail when totally blocked by debris, resulting in the expense and labor of cleaning the system of debris and replacement of the damaged basket.A · US 9,945,141 B2 · ¶ 7
In the case of a Venturi skimmer, when the debris basket becomes blocked, the Venturi return line becomes a point of suction that can be very dangerous to a bather.A · US 9,945,141 B2 · ¶ 7
More specifically, the present invention relates to an adaptable disc golf basket that can be adjusted and fitted around a variety of objects, such as trees, poles and/or other structures.B · US 2022/0023731 A1 · ¶ 2
In this manner, the modified disc golf basket greatly minimizes the time and effort it takes to set up and take down the baskets.B · US 2022/0023731 A1 · ¶ 2
patent.fyi, US 2026/0355595 A1, claim 1, first published 2026-11-19T13:13:53-05:00, https://patent.fyi/US20260355595/, SHA-256 449d8060a4f5bc45711acee8c067dc07029feb9b5569795aa60e794e8b5d58fa