1.1Components on a solid plate
The drive brackets bolt to the underside of the plate, and sealed electrical modules fasten to its upper face. External cable clamps hold the wiring clear of the wheels.
Generated automatically. Not reviewed by a person. Not legal advice or an opinion.
Questions about how individual parts of claim 1 might be changed. A question may describe something different from what the claim language recites, or a version of it; no view is offered on which.
The drive brackets bolt to the underside of the plate, and sealed electrical modules fasten to its upper face. External cable clamps hold the wiring clear of the wheels.
A motorized trolley carries the frame from its upper face and travels along a bridge beam. The bridge moves along a second set of rails, and the controller combines motion on both axes to trace the treatment path.
A downward-facing nozzle projects abrasive onto the strip between the wheels. The controller uses the nozzle position relative to the wheel axes when setting the start, end, and lateral spacing of each pass.
Room walls intercept rebounding abrasive, and floor grates collect settled media in a hopper. An exhaust fan draws airborne dust through a cartridge filter and keeps the room below the pressure of adjacent spaces.
An overhead cable reel pays out the tether as the robot advances and takes it up on return passes. A rectifier on the robot supplies the motor drives, and a DC converter supplies the sensors and controller.
Further arrangements of the same subject matter, described here as of the publication date at the foot of this page.
A battery-powered wheeled robot carries a shrouded abrasive head over cured precast concrete panels supported on a low casting bed. The controller uses the panel outline and a surface height map to plan overlapping passes around openings and projecting inserts. During each pass, the controller adjusts the head height to follow the panel profile and switches off the abrasive stream before the shroud crosses an edge.
Two longitudinal screw drums with opposite helical handedness replace the wheeled traveling unit for operation on wet sediment beside exposed work surfaces. Sealed gearmotors drive the drums independently, and the controller varies their relative speeds to steer the frame. A forward arm carries the shrouded blasting head over the work surface and adjusts its pitch as the frame moves over uneven ground.
A compact chassis carries a blast head that produces a 60 mm cleaned strip on a flat calibration coupon at a 25 mm nozzle standoff. The controller spaces adjacent pass centerlines 45 mm apart to provide 15 mm of overlap and sets the nominal traverse speed to 50 mm/s. The head actuator maintains the calibrated standoff along each pass, and the controller shuts off media flow during turns.
A suction port on the head shroud connects through a flexible overhead hose to a stationary abrasive recovery system. A cyclone removes coarse solids from the return airflow, and a vibrating screen separates reusable grit from oversized debris before a fines separator removes undersized particles. A pressure feed pot sends the recovered grit back to the robot through a separate delivery hose. A vacuum switch at the shroud stops abrasive flow when suction falls below the operating threshold.
A floor-mounted indexing turntable supports a curved casting with its rotation axis registered to the robot's travel coordinates. The turntable encoder reports the angular position to the robot controller, and a clamp sensor confirms that the casting is secured. The robot traverses each exposed band while adjusting head height and spray angle to the mapped profile, then stops the abrasive stream and retracts the head before the table indexes.
A line-scan color sensor and a shielded light bar mount behind the blast shroud and inspect the treated strip. Wheel encoder readings locate each scan line along the pass, and software compares the recorded color with reference samples of the exposed substrate and the coating. The controller adds regions classified as residual coating to a local repeat-pass queue and runs those passes at a reduced traverse speed.
Three spring-loaded rollers contact the surface around the blast footprint and carry the nozzle on a sliding gimbal. Changes in roller position shift and tilt the nozzle, and a fixed offset between the roller contact plane and the nozzle sets the working distance.
Two rubber tracks mount beneath the frame, each driven by its own geared electric motor. Equal track speeds produce straight travel, and a speed difference turns the robot.
A spring-loaded hood surrounds the nozzle and carries overlapping brush strips that follow the work surface. A suction port draws rebounding abrasive and dust into a separator, which drops the heavier particles into a collection bin.
A line laser and an offset camera measure the surface profile across the treatment path by triangulation. A separate scanning range sensor measures obstacles ahead of the traveling unit and reports their distance and bearing.
The controller fits a local plane to measured surface points and calculates the nozzle tilt from the plane normal. A rotary actuator aligns the nozzle, and a ball screw stage holds its outlet at a programmed distance from the surface.
Passages reproduced word for word from two earlier-published U.S. patent documents, placed beside the language of claim 1. No characterization is offered. Each passage is marked A or B for the document it comes from; ¶ numbers are the paragraph numbers in the USPTO’s published full text of that document.
A device (33) for blast-machining or abrasive blasting objects such as structural elements, tools, household objects, pots, pans or the like, has a blast pot (3) for holding a blasting abrasive (35) which is connected via at least one line (21) to a blasting nozzle (24) which extends into a blasting space (1) in which the objects which are to be blasted can be placed.A · US 2011/0306279 A1 · abstract
The high-pressure air/media mixture is then fed down a blast hose and out of a blast nozzle that directs the mixture onto the surface to be cleaned.B · US 2021/0331290 A1 · ¶ 2
For this purpose, it is advantageous that the system consisting of the blasting space and at least the blast pot is designed as a closed pressurized system to which in operation a working pressure, in particular gas or compressed air, is applied which at least in the working process and at least in the blast pot acts on the suspension formed from a liquid and a blasting abrasive and/or on the granular material and/or on the granular material mixture and that the system, in paA · US 2011/0306279 A1 · ¶ 32
The control system controls delivery of air and blast media to a blast nozzle of the abrasive blasting apparatus.B · US 2021/0331290 A1 · abstract
In use, an external compressed air supply 1 is connected to the ACV air inlet 41 and an electrical power supply (not shown) provided to the electrical control equipment.B · US 2021/0331290 A1 · ¶ 71
An empty cell means only that no passage was reproduced there.
The invention relates to a device with a blasting nozzle for blast-machining or abrasive blasting objects such as structural elements, tools, household objects, pots, pans or the like, having a blast pot for holding a blasting abrasive which is connected via at least one line to the blasting nozzle which extends into a blasting space in which the objects which are to be blasted can be placed.A · US 2011/0306279 A1 · ¶ 2
The blasting result (FIG. 3) with the injector blasting gun is not optimal as only a small central area is heavily blasted and the surrounding annular area is blasted significantly less heavily.A · US 2011/0306279 A1 · ¶ 6
It has been found that when the deadman's switch is actuated again blast media in the blast hose tends to aggregate, resulting in a slug of blast media being ejected from the blast nozzle.B · US 2021/0331290 A1 · ¶ 4
The control system reduces the frequency and severity of blast media slugs forming in the abrasive blasting apparatus when blasting.B · US 2021/0331290 A1 · ¶ 8
patent.fyi, US 2026/0355903 A1, claim 1, first published 2026-11-19T16:57:22-05:00, https://patent.fyi/US20260355903/, SHA-256 ee1eab4a55bbeefe6c7802e02467af9fc20e590ca10c15e29c059cc355f736ca