1.1Rider selected speed reference
A rotary selector sets a reference from 8 to 24 km/h in 2 km/h steps. The controller reads the selected reference every 20 ms and tapers motor torque as the inertial speed estimate approaches it.
Generated automatically. Not reviewed by a person. Not legal advice or an opinion.
Questions about how individual parts of claim 1 might be changed. A question may describe something different from what the claim language recites, or a version of it; no view is offered on which.
A rotary selector sets a reference from 8 to 24 km/h in 2 km/h steps. The controller reads the selected reference every 20 ms and tapers motor torque as the inertial speed estimate approaches it.
A downward-facing camera captures road texture at 100 frames per second, and a range sensor supplies the camera-to-road distance. An image processor tracks the pixel displacement of road features between frames, and a trained regression model converts the displacement and distance into a forward speed estimate.
A complementary filter combines accelerometer and gyroscope readings to track frame pitch. The controller subtracts the gravity component along the forward axis and integrates the corrected acceleration over each 100 ms interval to obtain a speed change.
The controller rotates the inertial measurements into a level reference frame and divides horizontal lateral acceleration by yaw rate during steady turns. It updates the estimate when the absolute yaw rate exceeds 0.15 radians per second and uses the wheel speed channel between turns.
Every 20 ms, the controller multiplies the measured wheel speed by 0.8 and the inertial speed estimate by 0.2, then adds the results. A torque table uses the blended speed and measured pedal torque to set the motor current command.
Further arrangements of the same subject matter, described here as of the publication date at the foot of this page.
An electric warehouse tow tractor carries an axle encoder and a chassis-mounted inertial unit. A trained model uses windows of longitudinal acceleration and yaw rate to estimate signed changes in travel speed, while the controller calculates changes from encoder samples over the same windows. The controller reduces the traction torque limit as the difference between the two changes increases and restores the limit at a bounded rate as they converge.
A downward-looking Doppler radar replaces the wheel speed pickup and measures longitudinal ground speed from a beam aimed forward at a fixed angle to the chassis. The controller projects the measured line-of-sight velocity onto the travel axis using the mounting angle and pitch from a chassis-mounted inertial unit. A trained model estimates speed change from acceleration and angular rate samples, and the controller reduces motor assist in proportion to the difference between that estimate and the radar speed change over the same interval.
A gradient-boosted decision tree ensemble replaces a recurrent neural network as the speed change estimator. The controller divides each 200-millisecond inertial window into four consecutive bins and supplies the mean acceleration and angular rate on each axis in each bin to the ensemble. The sum of the tree outputs gives the signed speed change, and the controller scales down positive motor torque as the absolute difference from the wheel speed change over that window increases.
A wheel encoder reports speed at 50 Hz, and a frame-mounted inertial unit samples acceleration and angular rates at 200 Hz. Every 20 milliseconds, a trained model estimates speed changes over trailing windows of 80 and 320 milliseconds, and the controller subtracts the corresponding changes in encoder speed. The controller applies a separate gain to the absolute difference for each window and uses the larger result to reduce the motor torque limit.
An electric cargo tricycle has a rear wheel speed encoder, a chassis-mounted inertial unit, and a brake controller that blends motor regeneration with hydraulic friction braking. During braking, a trained model estimates chassis speed change from inertial samples, and the brake controller compares it with the rear wheel speed change over the same interval. When the rear wheel decelerates faster than the chassis, the controller decreases rear motor regeneration and transfers braking demand to the front friction brakes within their wheel slip limits.
A controller timestamps wheel speed and inertial samples with a common clock and runs a trained model on successive inertial windows to estimate speed changes. During straight coasting intervals with measurable deceleration, software tests offsets from 0 to 80 milliseconds in 5-millisecond steps and selects the offset that minimizes the median absolute difference between model and wheel speed changes. The controller applies the selected offset to subsequent wheel sample timestamps and uses the aligned comparison to adjust motor assist.
A ring with 24 magnetic pole pairs rotates with the wheel hub, and a stationary Hall sensor produces one rising edge per pole pair. The controller divides the wheel circumference by 24 times the interval between consecutive rising edges to calculate speed.
A six-axis inertial sensor mounted to the frame measures three acceleration axes and three angular-rate axes at 200 Hz. The controller uses a common timer to timestamp inertial samples and wheel pulses, then interpolates the inertial channels to each wheel-speed measurement time.
A one-dimensional convolutional model receives a rolling window of 40 samples from the three acceleration and three angular-rate channels at 200 Hz. Training uses speed changes recorded by a ground-referenced speed sensor, and the deployed model outputs a speed change in metres per second for each 200 ms window.
The controller subtracts inertial estimated speed from measured wheel speed at five consecutive updates spaced 20 ms apart. When all five differences exceed 1.0 m/s, it ramps the motor current limit down by 30 percent over the next 100 ms.
Passages reproduced word for word from two earlier-published U.S. patent documents, placed beside the language of claim 1. No characterization is offered. Each passage is marked A or B for the document it comes from; ¶ numbers are the paragraph numbers in the USPTO’s published full text of that document.
The wheel tachometer is also referred to as a wheel speed sensor, and the second pose information is configured to represent the corresponding position information and/or posture information of the autonomous driving vehicle collected by the wheel tachometer, where the posture information includes speed, acceleration and other information.B · US 2021/0370970 A1 · ¶ 58
A conventional IMU detects acceleration and rate of change in attitude (i.e., roll, pitch, and yaw rates) and measures these parameters over time to find the total change from the initial position.A · US 7,526,402 B2 · ¶ 3
Generally, one IMU includes three single axis accelerometers and three single axis gyroscopes, where the accelerometer detects acceleration signal of an object on independent three-axis in a carrier coordinate system, and the gyroscope detects angular velocity signal of a carrier relative to a navigation coordinate system, so as to measure the angular velocity and the acceleration of the object in the three-dimensional space.B · US 2021/0370970 A1 · ¶ 56
An IMU does not detect linear velocity and position directly, which are computed parameters, by integration and double integration, based on measured accelerations, angular rates, and initial conditions.A · US 7,526,402 B2 · ¶ 4
The method includes: collecting first pose information measured by an inertial measurement unit within a preset time period, and collecting second pose information measured by a wheel tachometer within the time period, where the time period is a sampling time interval when a camera collects adjacent frame images; generating positioning information according to the first pose information, the second pose information and the adjacent frame images; controlling driving of the autB · US 2021/0370970 A1 · ¶ 65
An empty cell means only that no passage was reproduced there.
As a closed system it is used to detect attitude and motion changes, and can be employed to determine the motion of a carrier, such as aircraft, and geo-location measurements on sensor equipment, wearable computing, e.g., as in movement detection measurements of soldiers operating on the ground, and camera stabilization platforms.A · US 7,526,402 B2 · ¶ 3
Conventional IMUs are generally associated with high cost, large bulk, high power consumption, limited lifetime, and long turn-on time.A · US 7,526,402 B2 · ¶ 5
However, in the implementation of the proposal, the inventor found at least the following problem: the accuracy of the estimated position and posture is low since the camera is prone to vibrate during motion.B · US 2021/0370970 A1 · ¶ 5
A positioning method and device for accurately positioning, an autonomous driving vehicle, an electronic device and a storage medium are provided.B · US 2021/0370970 A1 · ¶ 6
patent.fyi, US 2026/0356455 A1, claim 1, first published 2026-11-20T01:43:50-05:00, https://patent.fyi/US20260356455/, SHA-256 d16d73eadd45f9cfbef4b8302d036d91735a24c055a3f376f3c15a5a32e339ad